ERP702 works best with Elites custom ribbons manufactured for best results with the ERP702.
Elite ribbons are a special matte polypropylene ribbon with a special coating that allows the text to adhere. Other types of ribbons that can be used are silk and satin (please be advised satin acetate ribbons will not work).
STARTER KITS COMES WITH:
- THE PRINTER,
- POWER SUPPLY,
- CD,
- MANUAL,
- VIDEO,
- 1 PARALLEL CABLE,
- 1 ROLL ELITE GOLD FILM,
- 1 ROLL OF RIBBON.
- 2 Year Warranty on Printer & 6 Month Warranty on Print head
AND, FOR THIS AUCTION:
- 5/8" RIBBON GUIDE
- EXTERNAL MEDIA HOLDER
- USB CABLE TO CONNECT ERP702 PRINTER TO YOUR COMPUTERS USB PORT
Technical SpecificationsCompact Size | W 7.3" x H 6.0" x L 10.9"
(W 186mm x D 153mm x H 278mm) | Weight | 4.6 lbs (2.1kgs) | Power Source | 19 VAC or DC24V (min. 2.5A) 50/60 Hz | Agency Listing | CED, UL, CUL, FCC class B | Software Requirements | Microsoft Windows Operating System (version 95+) | Printing Resolution | 203 dpi (8 dots/mm) | Max Print Speed | 3 ips (76mm/s) | Max Printing Length | 43" (1092mm) | Min-Max Printing Width | .25" (6.35mm) - 4.13" (105mm) | Graphic | PCX bit map
GDI Graphics | Interface | RS-232 serial, Centronics | Operation Environment | 40oF ~ 100oF (4oC ~ 38oC)
Humidity: 10~90% non-condensing |
How a Thermal Transfer Ribbon Printer worksThe thermal transfer process is accomplished in a thermal transfer printer by applying a voltage to the printhead that consists of 200 to 600 resistive heating elements per linear inch of printhead (dpi-dots per inch). The resistive material is covered by a thin coating or "glaze" that protects the heating elements from abrasion as the thermal transfer film makes contact with it. The line of printhead elements is in direct pressure contact with the back side of the thermal film. The ink side of the thermal film is in direct contact with the receiver (ribbon). This thermal film and receiver "sandwich" is driven by a rubber-covered platen roller under the printhead print line at a speed consistent with the heating cycle time of the printhead. Heat from the printing elements raises the ink to a temperature above its melting point. At this time the ink from the thermal film transfers to the receiver and adheres to it. Together, the thermal film and receiver continue to move from under the printhead for a short distance before separation of thermal film and receiver occurs. It is at this point that the image is formed. The text is permanent, water resistant and will not run.
Accessories Included
RIBBON GUIDE for ELITE ERP-702 THERMAL TRANSFER RIBBON PRINTEREXTERNAL MEDIA HOLDER for ELITE ERP-702 THERMAL TRANSFER RIBBON PRINTER
| 
Sign In
